BrandsTrade
Electronics, Amplifiers, Stereo Integrated Amplifiers
Atoll IN400 Evolution
Price on request — Enquire below
Front face in 10 mm brushed, micro-blasted and anodised aluminium, high-precision engraving. Heatsink and buttons in billet aluminium. 2 mm steel frame. Two toroidal transformers: 1050 VA (audio) + 1.6 VA (control logic). Integral double…
Specifications
Two toroidal transformers1050 VA (audio) + 1.6 VA (control logic).
Integral double mono structure– Separate windings for the tracks. – 1 attenuator per channel (with switched resistors).
Possibility of choosing the standby modeLow consumption or preheating.
High contrast OLED displayON or OFF mode (after 5 seconds of inaction).
TECHNICAL DATA Power2×160 Wrms / 8Ω – 2×300 Wrms / 4Ω Total of capacitors: 96 680 µF Bandwidth (-3 dB): 5 Hz – 100 kHz Rise time: 2 µs Input impedance: 357 kΩ Sensitivity: 450 mV Signal-to-noise ratio: 100 dB
Description
  • Front face in 10 mm brushed, micro-blasted and anodised aluminium, high-precision engraving.
  • Heatsink and buttons in billet aluminium.
  • 2 mm steel frame.
  • Two toroidal transformers: 1050 VA (audio) + 1.6 VA (control logic).
  • Integral double mono structure:
             – Separate windings for the tracks.
             – 1 attenuator per channel (with switched resistors).
  • Bipolar transistor input stages.
  • Current sources with bipolar transistors and LEDs to ensure perfect voltage stability.
  • Darlington transistor driver stages.
  • Audio stages with perfectly symmetrical structure and very low counter-reaction.
  • Power stages with MOS FET transistors (8 per channel) are rigorously matched.
  • Precise adjustment of the balance and the possibility of memorising it.
  • Possibility of choosing the standby mode: Low consumption or preheating.
  • Configurable button backlighting.
  • High contrast OLED display: ON or OFF mode (after 5 seconds of inaction).
  • ATOLL global remote control delivered as standard.
  • The IN400 Evolution can receive the following optional boards:
              – DAC boards: DA100 and DA200.
              – PHONO boards: P50 and P100 (can be combined with DAC boards).
  • TECHNICAL DATA

    Power: 2×160 Wrms / 8Ω – 2×300 Wrms / 4Ω
    Total of capacitors: 96 680 µF
    Bandwidth (-3 dB): 5 Hz – 100 kHz
    Rise time: 2 µs
    Input impedance: 357 kΩ
    Sensitivity: 450 mV
    Signal-to-noise ratio: 100 dB
    Distortion rate at 1 kHz: 0,05 %
    Standby consumption (low consumption): < 0,5 W
    Dimensions: 440×370×130 mm
    Weight: 19,5 Kg

Rating & reviews
Similar products
Experience premium sound and elegant design, with fast delivery and secure checkout — where audio perfection begins
Denon PMA-900HNE Integrated Network Amplifier
Price on Request
Anthem AV STR Integrated - Integrated Amplifier
AED 18,880
Anthem AV STR Power - Power Amplifier
AED 22,635
Anthem AVM 70 - 15.2 Pre-Amplifier/Processor
AED 16,300
The following measurements are to be used as a guide