he DV2 builds on EMM Labs’ ground breaking technology used in our flagship, multi-award winning DA2 converter by integrating EMM’s high resolution volume control system (VControl™) into our discrete, single bit converter.

VControl™ maintains the input signal without re-quantization allowing for complete transparency at any volume setting, wide attenuation range, and no loss of audio resolution.

16xDSD MDAC2™ and MDAT2™ DSP

MDAC2™ is the worlds first fully discrete single-bit D-to-A converter with an internal conversion rate of 1024fs (16xDSD) and is completely free of inherent non-linearity that plagues every mass market chip created to date.

Our MDAT2™ DSP has been refined and updated to synergistically work with the MDAC2™. The MDAT2™ DSP performs real-time transient detection in addition to processing and up-conversion of all incoming audio before being sent to the MDAC2™ for conversion.

• 
  
  
  • Proprietary & discrete dual differential D-to-A converters (MDAC2™)
  
  
  

• 
  
  
  • New high resolution volume control system with High/Low output gain control (VControl™)
  
  
  

• 
  
  
  • Latest generation Meitner Digital Audio Translator signal processing technology (MDAT2™)
  
  
  

• 
  
  
  • Enhanced technology for instant signal acquisition and jitter-free performance (MFAST™)
  
  
  

• 
  
  
  • Proprietary asynchronous clocking system (MCLK2™)
  
  
  

• 
  
  
  • USB interface with custom hardware galvanic isolation
  
  
  

• 
  
  
  • Up to 24bit/192kHz & DSD support over all inputs
  
  
  

• 
  
  
  • 2xDSD, DXD (352/384kHz) & MQA® support over USB
  
  
  

• 
  
  
  • User controlled signal polarity
  
  
  

• 
  
  
  • Custom aerospace-grade ceramic circuit boards
  
  
  

• 
  
  
  • EMM Optilink for connection to an EMM transport
  
  
  

• 
  
  
  • Precision-machined aluminum chassis & remote control
  
  
  

• 
  
  
  • Service USB port for future software upgrades
  
  
  

• 
  
  
  • RS-232 serial port for wired remote control
  
  
  

Power Supply:
Proprietary high-isolation resonant mode power supply for silent & eco-friendly operation
Factory set to 100V or 115V or 230V, 50/60Hz
Maximum 30W consumption

Digital inputs:
EMM Optilink (CD/SACD)
AES/EBU, 2x S/PDIF Coax, 2x S/PDIF, TOS & USB up to 24bit/192kHz and DSD
USB also supports 2xDSD, DXD (352/384kHz) & MQA®
Stereo Analog Outputs:
XLR and RCA

Output Impedance:
300 ohms balanced (XLR)
150 ohms unbalanced (RCA)

Output Levels (High/Low):
XLR outputs: 7.0/5.0V (+19.1/16.2dBu)
RCA outputs: 3.5/2.5V (+13.1/10.2dBu)

Dimensions:
W x D x H: 438 x 400 x 161mm
Weight: 17.2kg