The SVS SoundPath Tri-Band Wireless Audio Adapter is your simple solution to messy cables and limited placement for your subwoofer or powered speakers. This smart device lets you send audio signals wirelessly, freeing you to put your gear exactly where it sounds best, not just where a cable reaches. What makes it special is its "Tri-Band" technology. It constantly scans and automatically switches between three different wireless frequencies (2.4 GHz, 5.2 GHz, and 5.8 GHz). This means it skillfully avoids interference from your home Wi-Fi, Bluetooth devices, and even microwaves, ensuring your sound stays clear and uninterrupted. Setting it up is a breeze – just plug in the small transmitter and receiver units, and they connect instantly. You'll get high-quality sound without any noticeable delays, making it perfect for movies, music, and gaming. You can even use one transmitter to connect up to three receivers, ideal for multiple subwoofers or spreading sound to different rooms. Enjoy pristine audio and a tidy setup, effortlessly.

Features

Connect Wirelessly With No Compromises
Tri-Band Technology Works Flawlessly in Congested Wireless Environments
Auto-switches between 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands to select the most stable channel for uninterrupted audio playback. Highly resistant to interference from Wi-Fi based security cameras, routers, smart TVs, and other wireless devices.

Uncompromised Sound Quality
Passes pristine 16-bit/48KHz audio signal up to 130-feet with no noticeable delay.

Eliminates Audio Cable Clutter
Streamlines home theater system setup by removing the need for long or complicated audio cables running along floors or walls.

True Stereo Signal
Left/Right stereo signal transfer unlocks wireless connectivity for one or more subwoofers, 2-channel zone of powered speakers, amplifiers, powered surround speakers, and more.

Full-Range Wireless Connectivity
Transmits the complete audible frequency spectrum (6Hz to 20kHz, +/-0.5 dB), providing a full-range wireless audio solution for subwoofers, powered speakers, and more. Great for adding additional zones to create single source multi-zone audio system.

Expands Placement Options
Adds wireless connectivity, giving you more flexibility when placing subwoofers, powered speakers, and other audio components in a room. All without sacrificing performance.

Quick and Easy 3-Minute Setup
- The transmitter and receiver come pre-paired, and setup takes only minutes:
- Connect the transmitter to an AV receiver, TV or other audio source via RCA
- Connect the receiver to a subwoofer, powered speaker, power amplifier, or other line level devices
- Make sure both the transmitter and receiver are receiving power (through included wall adapter or USB source)
- Wait a few seconds for the adapters to sync and you’re ready
- Up to three receivers can be paired to one transmitter to create a multi-room distributed audio system or for use with multiple powered subwoofers or speakers

Specifications

Transmitter:
- Analog input level: maximum 2Vrms
- Minimum power: 5V @0.5A
Receiver:
- Analog output level: maximum 1Vrms
- Minimum power requirement: 4.75V @0.3A

Key Specifications:
Dimensions: W 3.15" (80mm) x D 2.36" (60mm) x H 1.02 (26mm)
Weight: 1.25 lbs

- Deters against against both in and out of band sources of interference, including: microwaves, wireless cameras, cordless phones, Bluetooth devices and more
- Operates seamlessly alongside 802.11b/g/n Wi-Fi
- Automatic receiver antenna diversity minimizes fading and multi-path effects
- Seamless RF band/channel switching
- RF Band – Tri-Band (auto switching) (2.4/5.2/5.8 GHz) – finds the best solution and connects
Three RF frequency ranges for each frequency band:
- Band 1: 2400-2483.5MHz
- Band 2: 5150-5250MHz
- Band 3: 5725-5875MHz
- 22 Mbps wireless air data rate
Sample Rate: 48kHz
THD+N: -70dB (10Hz – 20kHz)
S/N: +105dB (10Hz - 20kHz)
Cross-talk: >75dB @1KHz
Frequency Response: 6Hz – 20 kHz +/- 0.5 dB
Audio Latency: < 19ms
- Transmission Range 130' (line of sight)